Mexicom

A great way of cutting down your electricity expenses and to make your own renewable hot water, you should definitely install a solar water panel system in your home. Some people have the misconception that the solar water panel systems can only be installed within the homes but actually, you can install the solar water panel system in the offices, industries or any other organization and cut down the expenses of electricity. But before making your final decision, you should definitely check for certain factors.

Here, I have rounded up the topmost factors, which you should consider while choosing the best solar water panel system for you because you cant afford to buy such an expensive or pricey affair just like anything.

Size and a total number of panels:

A basic solar panel is 2 meters in length and one meter in width. Though, 1-3 panels are more than enough but the selection can also be made on the basis of the total requirement of hot water. If you are unable to calculate the requirement of water or panels, you can go to a solar panel installer and you can go with his suggestion.

If you already have a hot water system but you are not getting enough water out of it, so you should definitely add a number of panels in the system. The number of panels can fulfil your requirements of the hot water. It is always good to get the panels from the same installer who has installed the old panel system in your home. If you are not satisfied with him then you have all the right to change him.

Kinds of panels:

Panels are basically divided into two categories I.e., evacuated tubes and flat plate technology. Out of both the types, evacuated tubes are the best one to select because it cannot only bear the frost damage but it can also offer the hot water in weak sunlight. But, people prefer flat plate technology because these are the cheaper options to select. If you want to select the cheaper option, you should definitely select the flat plate technology.

Don’t miss out the tanks!

There are basically two types of tanks available in the solar systems. One is the indoor tanks and the other ones are on roof tanks. The former ones are also known as the active solar hot eater system and the later ones are known as the passive solar hot water system. In the former ones, panels are installed over the roof, the tank is installed within the system, and the scenario is exactly different with the passive ones. This is the only reason the former ones are known as the active systems and the later ones are known as the passive systems. Though, there is still a lot about the ranks of the solar panel system and if you want to have the more depth knowledge, you can click the https://hydrosolar.ca/collections/pressurized-water-tanks and you will get the more and precise knowledge about the water tanks.